Ansible for Network Engineers
9,00 €In this course we will learn how to install and configure ansible and how to automate your network using ansible (monitoring and troubleshooting as well as network configuration).
Cisco FTD Design and Implementation
9,00 €Cisco FTD Design and Implementation including Firewall, SSL Inspection, NAT, IPS and Active/Standby HA based on FTDv version 7.0.1 and over vMware ESX
Cisco IS-IS Routing Protocol based on Cisco IOS Devices
9,00 €IS-IS routing protocol based on Cisco devices covers the concept and configuration of the most important topics related to IS-IS which is mostly used “but not limited” in service provider environments
CLI based Network Automation using Python Nornir
220,00 €CLI based network automation using python nornir based on cisco devices and python version 3.7+, covers the concept and implementation of network automation with practical examples using nornir scrapli, netmiko and napalm plugins and some other important topics. how to use jinja2 template in network automation, how to filter devices to apply automation, how to avoid clear text password and …
Note:
– With the purchase of this course, the first part of the videos can be downloaded immediately. The second part of the videos will be processed exclusively for you and will take 2 working days.
– You will also get access to the protected lessons of the purchased course.
F5 BIG-IP DNS
180,00 €F5 BIG-IP DNS
- DNS Name Resolution Process
- what is F5 BIG-IP DNS
- F5 DNS Express with Microsoft as primary DNS server
- F5 DNS Listener
- F5 ZoneRunner to create a local Bind DNS service
- Confguring DNS Express with F5 local Bind as primary DNS server
- F5 TSIG to authenticate zone transfer
- F5 LTM DNS load balancing
- F5 DNS Transparent Cache
- F5 DNS Resolver Cache
- what is F5 GSLB and intelligent name resolution
- F5 GSLB Configuration Examples
- F5 DNS GSLB Sync Group Configuration
- F5 DNS static and dynamic Load Balancing
- F5 DNSSEC configuration
- F5 DNS iRule Examples
- F5 DNS Logging
- F5 DNS order of Operations
Note:
– With the purchase of this course, the first part of the videos can be downloaded immediately. The second part of the videos will be processed exclusively for you and will take 2 working days.
– You will also get access to the protected lessons of the purchased course.
F5 BIG-IP LTM
180,00 €F5 BIG-IP LTM
- BIG-IP LTM Introduction
- BIG-IP Basic Configuration and Lab Preparation
- Load Balancing Traffic with LTM
- F5 LTM Profiles
- BIG-IP LTM Source NAT
- F5 BIG-IP iRule nad Traffic Policy
- Use F5 as Gateway with IP Forwarding Virtual Server
- F5 one-armed Topology
- F5 BIG-IP HA configuration
- Automate Application Service Deployment
- F5 BIG-IP Monitoring and Troubleshooting
- F5 Packet Filter
Note:
– With the purchase of this course, the first part of the videos can be downloaded immediately. The second part of the videos will be processed exclusively for you and will take 2 working days.
– You will also get access to the protected lessons of the purchased course.
Implementing Cisco SD-WAN Solution
9,00 €How is the Cisco SDN network different from traditional network architecture? What is a Cisco SDN Solution for WAN Networks? and most importantly, How is the Cisco SD-WAN architecture? in this course we will implement Cisco SD-WAN version 20.3.4 Solution but only with cEdge IOS-XE SD-WAN version and over vMware ESX Platform.
Juniper Junos Associate version 22.1R1.10 (JNCIA-Junos)
9,00 €Juniper Junos Associate course JNCIA-Junos is prerequisite for other Juniper courses. we will learn how to work with Junos CLI interface.
Juniper Security Associate (JNCIA-SEC) based on vSRX version 22.1R1.10
9,00 €Juniper Security Associate (JNCIA-SEC) based on vSRX version 22.1R1.10 covers the concept and configuration of the most important topics to configure a firewall in the network.
Network Automation and Orchestration using Cisco NSO
180,00 €cisco NSO is a multi-vendor network automation and service orchestration software:
- Install cisco NSO version 6.0 and connect to network devices
- display and change network configuration via cisco NSO
- NSO device Template and Network Automation
- cisco NSO compliance check and report
- cisco NSO live-status
- cisco NSO Service Template
- Cisco NSO python API
- managen NSO via RESTCONF
Note:
– With the purchase of this course, the first part of the videos can be downloaded immediately. The second part of the videos will be processed exclusively for you and will take 2 working days.
– You will also get access to the protected lessons of the purchased course.
Segment Routing
9,00 €what is segment routing? how it helps in traffic engineering and link protection? in this course different concept and scenario of segment routing is practically implemented with cisco IOS XR 6.3.3.
VXLAN EVPN
9,00 €What is VXLA EVPN? We will implement many vxlan evpn concepts including l2 and l3 forwarding, anycast gateway and multisite in this course.
YANG based Network Automation using NETCONF RESTCONF gNMI
220,00 €YANG-based network automation uses a YANG hierarchical data structure that is natively structured, and therefore provides the capability to programmatically configure and also monitor network devices.
In other words, in YANG based network automation, we do not send CLI commands anymore but we update or read the data inside YANG data structure.
…
Note:
– With the purchase of this course, the first part of the videos can be downloaded immediately. The second part of the videos will be processed exclusively for you and will take 2 working days.
– You will also get access to the protected lessons of the purchased course.